1/4 Inch Drive 6-Point Socket and Ratchet Set, 29-Piece (5/32-9/16 inch)
Set Includes:
Details
Large, Stamped Markings
- Permanently impressed into the material by a roll-stamp die
- As large as possible while still being readable along the socket's curved surface
- Clearly visible size numbers with extra-deep outline
Fully Stepped Shoulders
Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.
Exterior + Interior Finishes
- Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
- Interior is protected against rust with clear coat, rather than commonly-used metallic paint
6-Point Socket Opening
Provides an exact fit and maximum contact for hex fasteners
Prevents Fastener Round-Off
Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
Secure Drive Tool Engagement
- Four detent grooves provide a secure connection with the retaining ball of a drive tool
- Beveled inner rims help guide the socket onto other tools
High Torque Strength
Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation.
METRIC SERIES
| ANSI | TEKTON | ||
| Source: ASME B107.5M - 2002 | |||
INCH SERIES
| ANSI | TEKTON | ||
| Source: ASME B107.1 - 2002 | |||
90-Tooth Ratchet
- 4-degree swing arc
- Ultra-compact head is reduced in all dimensions
- Quick-release drive locks sockets onto tang and releases with the press of a button
Included Accessories
3 and 6 Inch Extensions
Reach past obstructions and into tight spaces. Knurled band provides grip for starting or turning loosened fasteners.
Universal Joint
Pin-style joints rotate smoothly and continuously to access fasteners at up to 55-degree angles.
Spinner Handle
Use the sockets like a nut driver with the spinner handle, adding a ratchet to the end for extra leverage.
Hex Bit Holder
Quickly change out and adapt any 1/4 inch hex shank bit to 1/4 inch drive tools.
Storage Case
- Resilient high-density polyethylene material withstands exposure to common lubricants, fuels, and solvents
- Strong latches, and hinges with metal pins
- Molded size markings for each tool inside the case
Specs
1/4 Inch Drive 6-Point Socket and Ratchet Set, 29-Piece (5/32-9/16 inch)
| Country of Origin | Taiwan |
| Item Weight | 2.8 lb. |
