Your web browser is not supported. For the best experience on Tekton.com, please upgrade to a modern browser such as Edge, Chrome, or Firefox
Home/Hand Drive Sockets/Spinner Handle
Click image to zoom in

1/4 Inch Drive High-Torque Spinner Handle

#SHH03125
 • 
$8.00
DetailsSpecs

Details

Expand Your Existing Systems with One Tool

The Tekton Spinner Handle is a universal screwdriver and nut driver that expands the usability of your existing 1/4 inch drive tool systems.

Use with:

Sockets & Accessories

6-point 12-point
IN
MM

Bit Sockets

Phillips tip-type Slotted tip-type Torx tip-type TR Torx tip-type Square tip-type Hex tip-type E-star tip-type

Hex Bit Holders

Hybrid Handle Design for Torque and Speed

A hand gripping the Tekton Spinner Handle. A inset displays the triangular shape of cross-sections taken from the middle of the handle.

Three-Sided Geometry for Torque

The handle’s three-sided geometry provides the leverage you need to generate high turning force by hand.

One hand lightly holding the top end of the Tekton Spinner handle with fingertips and another holding bottom, poised to spin. An inset shows the circular shape of cross-sections taken from the top and bottom of the handle.

Rounded Areas for Quick Spinning

Round sections at the front and back ends of the handle create an ideal shape for quickly spinning long fasteners.

Durable, Nonslip Handle

The overmolded grip is permanently bonded to the handle and won't degrade or become sticky over time.

RESISTANT TO:

  • Extreme Temps
  • Gas &
    Fuels
  • Oils &
    Grease
  • Cleaners & Solvents
The rounded end of the handle is printed with '1/4 drive' and the item number around the shape of the tip type.

Easy-to-Read Markings

The drive size is printed on the end of the driver for easy identification.

Secure Drive Engagement

Sockets are held onto the blade by a spring-actuated detent ball.

Materials and Construction

6150 Steel Blade

  • Hardened to 50–54 HRC
  • Chrome-plated shaft for corrosion resistance

Strong Connection

  • Insert-molded blade
  • Wings prevent twist-out
A lengthwise partially cut-open view of the Tekton Spinner handle. This view exposes where the blade connects to the handle and holds tight by a flattened, wing-like shape at the end of the steel blade.

A.6150 Steel Blade

  • Hardened to 50–54 HRC
  • Chrome-plated shaft for corrosion resistance

B.Polypropylene Handle

  • Reinforced with calcium carbonate for dimensional stability
  • Shore D 68 durometer

C.Strong Connection

  • Insert-molded blade
  • Wings prevent twist-out

D.Overmolded Grip

  • Soft thermoplastic elastomer (TPE)
  • Shore A 80 durometer

Specs

1/4 Inch Drive High-Torque Spinner Handle

Specs for 1/4 Inch Drive High-Torque Spinner Handle
Country of Origin
Blade made in Taiwan. Handle made in USA.
Item Weight
0.2 lb.
Patents