Every Size We Offer in One Set

Phillips
#0–#3

Slotted
1/8–5/16 in.

Torx^{^®}
T10–T30

Square
S1–S3

Hex
IN5/64–5/16 in.
MM1.5–8 mm

Nut
IN3/16–1/2 in.
MM6–10 mm

Apply High Torque

The handle's three-sided geometry directly engages the structure of your hand, instead of relying on friction with your skin, so you can apply high force with less fatigue.

One hand holding a High-Torque Screwdriver

Two hands spinning a High-Torque Screwdriver

Spin Fasteners Quickly

Round sections at the front and back ends of the handle allow you to spin long, finely threaded fasteners quickly and continuously.

High-Torque screwdriver gripping surface

Durable, Nonslip Handle

The overmolded grip provides a nonslip surface that is permanently bonded to the handle and won't degrade or become sticky over time.

RESISTANT TO:

Extreme Temps
Gas &
Fuels
Oils &
Grease
Cleaners & Solvents

Easy-to-Read Markings

Tip type and size are printed on the end of the driver for easy identification.

Phillips Tip

tekton's truncated tips fully engage the surface area of fasteners.

See Stubby Tip

Truncated at the tip to fully engage fasteners without bottoming out

Stubby Phillips Tip

See Standard Tip

Truncated at the tip to fully engage fasteners without bottoming out

Slotted Tip

See Stubby Tip

Machined tip is the same width as the shaft to fit into narrow recesses

Thick tip design withstands high-torque driving and light-duty prying

Stubby Slotted Tip

See Standard Tip

Compact tip allows a shorter overall blade length than the standard slotted tip profile

Torx^® Tip

Made to Torx^® dimensional standards and torque specifications for optimal performance in Torx^® and star fasteners

TORX^® is a registered trademark of Acument Intellectual Properties, LLC

Square Tip

Chamfered end with tapered sides fully engages fasteners without camming out

Hex Tip

Hex section is at least twice the depth of the corresponding socket head cap screw for full engagement

6-Point Socket

A minimum 1 inch recess inside the shaft accommodates excess threaded tails of long bolts or studs

Phillips screwdriver blades shown in 3 lengths

Phillips and Slotted in Three Lengths

Phillips and slotted screwdrivers include stubby (1 inch), standard (4 inch), and long (8 inch) blades.

Materials and Construction

AISI 8650 Steel Blade

Strong Ni-Cr-Mo alloy hardened to HRC 52–56

Polypropylene Handle

Reinforced with calcium carbonate for dimensional stability
Shore D 68 durometer

Overmolded Grip

Soft thermoplastic elastomer (TPE)
Shore A 80 durometer

AISI 4037 Steel Shaft

Strong alloy steel hardened to HRC 41–46

Polypropylene Handle

Reinforced with calcium carbonate for dimensional stability
Shore D 68 durometer

Overmolded Grip

Soft thermoplastic elastomer (TPE)
Shore A 80 durometer

Insert Molded for Exceptional Strength

We use a molding process that forms the handle around the blade, rather than forcing the blade into a premade handle. The result is a straighter blade that can’t twist out.

Every Size We Offer in One Set

Apply High Torque

Spin Fasteners Quickly

Durable, Nonslip Handle

RESISTANT TO:

Easy-to-Read Markings

Phillips Tip

Stubby Phillips Tip

Slotted Tip

Stubby Slotted Tip

Torx® Tip

Square Tip

Hex Tip

6-Point Socket

Phillips and Slotted in Three Lengths

Materials and Construction

AISI 8650 Steel Blade

Polypropylene Handle

Overmolded Grip

AISI 4037 Steel Shaft

Polypropylene Handle

Overmolded Grip

Insert Molded for Exceptional Strength

Torx^® Tip

High-Torque Black Oxide Blade Screwdriver and Nut Driver Set (58-Piece)

Phillips Sizes

Slotted Sizes

Torx Sizes

Square Sizes

Hex Sizes

Nut Driver Sizes