Click image to zoom in
3/32 Inch Hex High-Torque Screwdriver
Item #DHX11094
•
Ships today
Versatile Handle Design
Generate Higher Torque
The three-sided middle section of the handle leverages the structure of your hand to generate higher turning power longer.
Spin Fasteners Quickly
The round shape at the front and back ends of the handle allow you to spin fasteners quickly and continuously.
Durable, Nonslip Handle
The overmolded grip provides a soft, nonslip surface that is permanently bonded to the handle and won't degrade or become sticky over time.
RESISTANT TO:
- Extreme Temps
- Gas &
Fuels
- Oils &
Grease - Cleaners & Solvents
Easy-to-Read Markings
Tip type and size are printed on the end of the driver for easy identification.
Precisely Formed Hex Tip
- The tip geometry is milled to precise tolerances for an exact fit with fasteners.
- Made from strong, heat-treated steel so that the tips hold their shape over time.
Materials + Construction
AISI 8650 Steel Blade
- Strong nickel, chromium, molybdenum alloy hardened to HRC 52-56
- Black oxide finish - keep lightly oiled for best corrosion protection
Polypropylene Handle
- Reinforced with calcium carbonate for dimensional stability
- Shore D 68 durometer
Overmolded Grip
- Soft thermoplastic elastomer (TPE)
- Shore A 80 durometer
Insert Molded for Exceptional Strength
We use a molding process that forms the handle around the blade, rather than forcing the blade into a premade handle. The result is a straighter blade that can’t twist out.
3/32 Inch Hex High-Torque Screwdriver
A. Length | 8 in. |
B. Width | 1.3 in. |
C. Height | 1.3 in. |
D. Exposed Blade Length | 4 in. |
E. Handle Length | 4 in. |
F. Shaft Diameter | 0.125 in. |
G. Tip Length | 0.2 in. |
Weight | 0.13 lb. |
Country of Origin | United States |