Front view of Tekton 1/4, 3/8 inch drive aluminum spinner handle set. SHM99000
Angled view of black Tekton 1/4, 3/8 inch drive aluminum spinner handle with drive square set. SHM99000
Back-angled view of Tekton 1/4, 3/8 inch drive aluminum spinner handle with drive square set. SHM99000
Person holding black Tekton 1/4, 3/8 inch drive aluminum spinner handle with drive square set. SHM99000
Tap image to zoom in

Item #SHM99000
1/4 Inch Drive
3/8 Inch Drive

Aluminum Spinner Handle with Drive Square Set (4-Piece)

•
$60.00
Add to Cart

Details

Included in This Set

1/4 inch drive 5 and 6.5 inch spinner handles

1/4 Inch Drive


5 Inch and 6.5 Inch


3/8 inch drive 5.5 and 7 inch spinner handles

3/8 Inch Drive


5.5 Inch and 7 Inch



Close-up of the drive square in the handle of a 3/8 inch drive aluminum spinner handle

Drive Square in the Handle


Add a ratchet for extra leverage without removing the socket from the spinner handle. Break the fastener loose, pull the ratchet off, and spin it out by hand. Swap in a torque wrench when it's time to tighten to spec.


The 1/4 inch drive spinner handles have a 1/4 inch drive square, and the 3/8 inch drive spinner handles have a 3/8 inch drive square.

A hand removing a socket from the spinner handle

Short Shank for Compactness and Quick Tool Changes


The shank of the spinner handle is 1 inch
A spinner handle reaching into a tight space

Long Shank for Extended Reach


The exposed shank of the spinner handle is 2.5 inches
Two hands spinning a spinner handle with socket

Coarse Knurling and Rounded Areas for Grip and Speed

A deep, sharp-cut diamond pattern is knurled into the rounded sections at the front and back of each handle to create a coarse, non-slip texture.
Close-up image of the knurling on a spinner handle
A spinner handle and socket on a concrete surface.

Tri-Lobe Shape for More Torque and Roll Resistance

Each handle's three-sided geometry gives you the leverage to apply higher turning force by hand while also keeping it from rolling on flat surfaces.
Red graphic showing the cross-section of the spinner handle
The shank of a spinner handle connecting with a socket

Secure Drive Engagement


Sockets and accessories are held onto each shank by a spring-actuated detent ball.

A disassembled spinner handle with each part labeled.

Materials and Construction


Each spinner handle is made of a steel extension that runs all the way through an aluminum handle and is permanently pressed in place. Two "wings" on the shaft of each extension prevent it from being twisted or pulled out of the handle.


A. Handle: 6061 aluminum with a matte black anodized finish

B. Extension: 50BV30 chromium-vanadium steel with a chrome-plated finish

Expand Your Existing Systems with One Tool


These spinner handles are universal screwdrivers and nut drivers that expand the usability of your existing 1/4 and 3/8 inch drive tool systems.


Specifications

1/4, 3/8 Inch Drive Aluminum Spinner Handle with Drive Square Set, 4-Piece (5, 5.5, 6.5, 7 in.)

Country of Origin
Taiwan
Item Weight
1.74 lb.