Angled view of black Tekton 3/8 inch drive, 7 inch aluminum spinner handle with drive square. SHM14126
Back-angled view of black Tekton 3/8 inch drive, 7 inch aluminum spinner handle with drive square. SHM14126
Black Tekton 3/8 inch drive, 7 inch aluminum spinner handle with drive square. SHM14126
Front view of Tekton 3/8 inch drive, 5.5 inch aluminum spinner handle with drive square. SHM14111
Person holding black Tekton 3/8 inch drive, 7 inch aluminum spinner handle with drive square. SHM14126
Tap image to zoom in

Item #SHM14126
3/8 Inch Drive
2.5 in. Shank

7 Inch Aluminum Spinner Handle with Drive Square

•
$20.00
Add to Cart

Details

Part of Our Spinner Handle Lineup


Our aluminum spinner handles come in two drive sizes (1/4 and 3/8 inch) and two shank lengths. Each one is made of a steel extension that runs all the way through an aluminum handle and is permanently pressed in place. The tri-lobe shape helps increase torque and keeps the tool from rolling on flat surfaces, while rounded sections with aggressive knurling make it easy to spin quickly. A drive square in the end of each handle lets you add a ratchet, breaker bar, or torque wrench.

Close-up of the drive square in the handle of a 3/8 inch drive aluminum spinner handle

3/8 Inch Drive Square in the Handle


Add a ratchet for extra leverage without removing the socket from the spinner handle. Break the fastener loose, pull the ratchet off, and spin it out by hand. Swap in a torque wrench when it's time to tighten to spec.


Image of a hand putting a ratchet on the drive square
Hands spinning the spinner handle

Coarse Knurling and Rounded Areas for Grip and Speed


A deep, sharp-cut diamond pattern is knurled into the rounded sections at the front and back of the handle to create a coarse, non-slip texture.


Close-up of the knurling on the handle
A 7 inch spinner handle laying on a work surface.

Tri-Lobe Shape for More Torque and Roll Resistance


The handle's three-sided geometry gives you the leverage to apply higher turning force by hand while also keeping it from rolling on flat surfaces.


Red graphic showing the cross-section of the spinner handle
A spinner handle reaching into a tight space

2.5 Inch Shank for Extended Reach


The exposed shank is 2.5 inches long to extend your reach into tight spaces.


The exposed shank of the spinner handle is 2.5 inches
The shank of a spinner handle connecting with a socket

Secure Drive Engagement


Sockets and accessories are held onto the shank by a spring-actuated detent ball.

A disassembled spinner handle with each part labeled.

Materials and Construction


A 7 inch steel extension runs all the way through an aluminum handle and is permanently pressed in place. Two "wings" on the shaft of the extension prevent it from being twisted or pulled out of the handle.


A. Handle: 6061 aluminum with a matte black anodized finish

B. Extension: 50BV30 chromium-vanadium steel with a chrome-plated finish

Expand Your Existing Systems with One Tool


The spinner handle is a universal screwdriver and nut driver that expands the usability of your existing 3/8 inch drive tool systems.


Specifications

3/8 Inch Drive x 7 Inch Aluminum Spinner Handle with Drive Square (2.5 Inch Shank)

Specs for 3/8 Inch Drive x 7 Inch Aluminum Spinner Handle with Drive Square (2.5 Inch Shank)
Country of Origin
Taiwan
Item Weight
0.58 lb.