5.5 Inch Aluminum Spinner Handle with Drive Square
Details
Part of Our Spinner Handle Lineup
Our aluminum spinner handles come in two drive sizes (1/4 and 3/8 inch) and two shank lengths. Each one is made of a steel extension that runs all the way through an aluminum handle and is permanently pressed in place. The tri-lobe shape helps increase torque and keeps the tool from rolling on flat surfaces, while rounded sections with aggressive knurling make it easy to spin quickly. A drive square in the end of each handle lets you add a ratchet, breaker bar, or torque wrench.

3/8 Inch Drive Square in the Handle
Add a ratchet for extra leverage without removing the socket from the spinner handle. Break the fastener loose, pull the ratchet off, and spin it out by hand. Swap in a torque wrench when it's time to tighten to spec.


Coarse Knurling and Rounded Areas for Grip and Speed
A deep, sharp-cut diamond pattern is knurled into the rounded sections at the front and back of the handle to create a coarse, non-slip texture.


Tri-Lobe Shape for More Torque and Roll Resistance
The handle's three-sided geometry gives you the leverage to apply higher turning force by hand while also keeping it from rolling on flat surfaces.


1 Inch Shank for Compactness and Quick Tool Changes
The exposed shank is 1 inch long to keep the overall length short and compact, while also being long enough for your fingers to fit under a socket and easily remove it.


Secure Drive Engagement
Sockets and accessories are held onto the shank by a spring-actuated detent ball.

Materials and Construction
A 5.5 inch steel extension runs all the way through an aluminum handle and is permanently pressed in place. Two "wings" on the shaft of the extension prevent it from being twisted or pulled out of the handle.
A. Handle: 6061 aluminum with a matte black anodized finish
B. Extension: 50BV30 chromium-vanadium steel with a chrome-plated finish
Expand Your Existing Systems with One Tool
The spinner handle is a universal screwdriver and nut driver that expands the usability of your existing 3/8 inch drive tool systems.
Specifications
3/8 Inch Drive x 5.5 Inch Aluminum Spinner Handle with Drive Square (1 Inch Shank)

| Country of Origin | Taiwan |
| Item Weight | 0.51 lb. |










