Your web browser is not supported. For the best experience on, please upgrade to a modern browser such as Edge, Chrome, or Firefox
Click image to zoom in

1/4 Inch Drive 12-Point Socket and Ratchet Set, 56-Piece (5/32 - 9/16 in., 4 - 15 mm)



Large, Stamped Markings

  • Permanently impressed into the material by a roll-stamp die.
  • As large as possible while still being readable along the socket's curved surface.
  • Clearly visible size numbers with extra-deep outline.

Fully Stepped Shoulders

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.

Exterior and Interior Finishes

  • Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish.
  • Interior is protected against rust with clear coat, rather than commonly-used metallic paint.

12-Point Socket Opening

Provides an exact fit and maximum contact for hex fasteners.

Prevents Fastener Round-Off

Radiused corners prevent fastener round-off by applying force to a fastener’s flat sides, rather than its corners.

Secure Drive Tool Engagement

Detent grooves and beveled edges provide a smooth and secure connection with the drive tool.

High Torque Strength

Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation.

90-Tooth Ratchet

  • 4-degree swing arc.
  • Ultra-compact head is reduced in all dimensions.
  • Quick-release drive locks sockets onto tang and releases with the press of a button.

Included Accessories

3 and 6 Inch Extensions

Reach past obstructions and into tight, narrow spaces.

Universal Joint

Reach around obstructions and access fasteners at an angle.

Spinner Handle

Attach sockets to the spinner handle and use it like a nut driver.

Magnetic Hex Bit Holder

Adapt any 1/4 inch hex shank bit to 1/4 inch drive ratchets, driver handles, and other drive tools.

Storage Case

  • Resilient high-density polyethylene material withstands exposure to common lubricants, fuels, and solvents.
  • Strong latches, and hinges with metal pins.
  • Molded size markings for each tool inside the case


1/4 Inch Drive 12-Point Socket and Ratchet Set, 56-Piece (5/32 - 9/16 in., 4 - 15 mm)

Specs for 1/4 Inch Drive 12-Point Socket and Ratchet Set, 56-Piece (5/32 - 9/16 in., 4 - 15 mm)
Country of Origin
Sockets, accessories, ratchet, spinner handle blade, and case made in Taiwan. Spinner handle molded in USA.
Item Weight
4.67 lb.