Click image to zoom in
1/4 Inch Drive x 1/4 Inch Deep 12-Point Socket
Item #SHD03206
•
$5.00
Details
Large, Stamped Markings
- Permanently impressed into the material by a roll-stamp die
- As large as possible while still being readable along the socket's curved surface
- Clearly visible size numbers with extra-deep outline
Fully Stepped Shoulders
Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.
![](https://media.tekton.com/images/details/hand-drive-sockets/1-4-in-drive/tekton-socket-fully-stepped-shoulders-2x.png)
Exterior and Interior Finishes
- Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
- Interior is protected against rust with clear coat, rather than commonly-used metallic paint
12-Point Socket Opening
Provides an exact fit and maximum contact for hex fasteners.
![](https://media.tekton.com/images/details/hand-drive-sockets/1-4-in-drive/tekton-12-point-socket-opening-inset.jpg)
Prevents Fastener Round-Off
Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.
Secure Drive Tool Engagement
Detent grooves and beveled edges provide a smooth and secure connection with the drive tool.
1/4 Inch Drive Deep Length Socket Proof Torque
Meets a minimum value of 1.2 times the ASME standard for proof torque. Verified by a single-cycle test that applies torque until the specified value is reached without failure or permanent deformation.
Data from: ASME B107.110-2019
Specs
1/4 Inch Drive x 1/4 Inch Deep 12-Point Socket
![Specs for 1/4 Inch Drive x 1/4 Inch Deep 12-Point Socket](https://media.tekton.com/images/spec/SHD03206_spec.jpg)
Country of Origin | Taiwan |
Item Weight | 0.05 lb. |