Top view of Tekton 4 inch screwdriver set. Item #DWZ90101

Laid out contents of Tekton 4 inch screwdriver set. Item #DWZ90101

Front-right angle view of Tekton 4 inch screwdriver set. Item #DWZ90101

Side view of Tekton 4 inch screwdriver set. Item #DWZ90101

Person holding Tekton 4 inch screwdriver set. Item #DWZ90001

Click image to zoom in

Item #DWZ90101

Phillips, Slotted, Torx, Square Screwdriver Set with Modular Organizers - 4 Inch Shanks, 18-Piece (#0-#3, 3-8 mm, T10-T30, #1-#2)

•

Storage Option

$125.00

Set Includes:

PHILLIPS #0, #1, #2, #3 (4 sizes)
SLOTTED 3, 3.5, 4, 5.5, 6.5, 8 mm (6 sizes)
TORX T10, T15, T20, T25, T27, T30 (6 sizes)
SQUARE #1, #2 (2 sizes)
Small Modular Driver Organizer Quantity: 4
Large Modular Driver Organizer Quantity: 6
Modular Driver Organizer Label Sheet (Phillips)
Modular Driver Organizer Label Sheet (Metric Slotted)
Modular Driver Organizer Label Sheet (Torx)
Modular Driver Organizer Label Sheet (Square)

Details Specs

Details

A hand holding a Tekton P2 screwdriver #DWP00302

Designed for Speed and Torque

The front of the handle is round for quick turning and the middle transitions to a tri-lobe shape that provides a secure grip for high-torque driving.

The front of the handle has a round zone, the middle has a tri-lobe zone.

P0, P1, and P2 drivers on a white background.

Three Handle Sizes that Scale with the Tips

Drivers with small tip sizes have smaller, more rounded handles for control with precision screws. Drivers with larger tip sizes have bigger, more triangular handles to turn large screws with more torque.

The P0 driver has a small handle, the P1 driver has a medium handle, and the P2 driver has a large handle.

A slotted 6.5 mm screwdriver turning a screw on a vehicle.

Soft Overmold Grip for Controlled Turning

The handle's red exterior is made of a lightly textured TPE material that is slightly soft and grippy for controlled spinning, fine adjustments, and reduced slipping under torque.

Handle materials resist most common shop chemicals.

Size Markings in Four Locations

Each driver has the tip size engraved in four locations with high-contrast laser markings.

Flared End Prevents Slipping

The front end of the handle has a tri-lobe shape that flares out to prevent your hand from slipping while you're pushing it forward and turning.

Phillips drivers on hooks on a pegboard and a P2 driver with a safety lanyard.

Through-Hole in Handle

Each screwdriver handle has the same size through-hole so you can hang it on a hook. You can also attach a safety lanyard when working at heights to prevent drops.

Tip Geometry and Coating

Tips are precisely machined and coated with black manganese phosphate, creating a slightly rough surface that enhances screw engagement. The conversion coating produces a uniform, corrosion-resistant layer that preserves tip geometry and resists flaking.

Phillips

Our Phillips tips are made to the ISO 8764-1 standard, and are also compatible with JIS screws. The surface of the cross tip is flatter to improve engagement and reduce cam-out.

JIS Compatible

Slotted

Our slotted tips have a slight wedge shape that grips both sides of the slot. The Inch series uses ASME sizing and the Metric series uses ISO sizing for a precise fit in slotted screws.

Torx^®

Our Torx tips are precisely machined to fit the six-point star pattern of Torx screws, with a slightly shorter overall tip length for additional strength.

Square

Our square tips are precisely machined to the classic tapered square profile for a precise fit in square-drive screws.

Cutaway view of a screwdriver, showing the flattened steel blade within the handle.

Steel Blade Won't Twist Out

The end of the blade is flattened to form a broad surface that resists twisting inside the handle. The handle is molded around the blade, creating a solid connection that is stronger and straighter than simply pressing the blade into a premade handle.

18 in. shanks are available on #2 Phillips and 6.5 mm slotted drivers. 8 inch shanks available on #1-#3 Phillips, 3/16-3/8 in. slotted, and 4-14 mm slotted. 4 inch shanks available on #0-#4 Phillips, 1/8-3/8 in. slotted, and 3-14 mm slotted.

Three Shank Lengths

Available for select sizes of Phillips and slotted drivers

Materials and Construction

Red Handle Overmold

Soft, grippy thermoplastic elastomer (TPE).

Black Handle Core

Hard polypropylene, injection molded around the blade.

Blade

Alloy steel, through hardened and tempered (including the tip), with a matte chrome finish.

Tip

Coated with black manganese phosphate.

Modular Driver Organizers

Modular pieces click together and hold screwdriver blades in slots to maintain consistent spacing between drivers and to prevent them from rolling in a drawer. Made of polypropylene, each piece is 1.2 inches tall to fit in shallow drawers.

Specs