8 Inch Long Nose Pliers

Item #PGF10008
Ships November 14
$18.00
  • Tapering to a fine tip just at the nose, the jaws have a thick base to prevent twisting
  • Stout, strong build resists bending or flexing along the entire length of pliers
  • Crosscut teeth distribute force evenly for sure grip in any direction
  • Side cutter with induction-hardened blades (HRC 58-64) cleanly snips copper, aluminum, and other soft metal wire
  • Slim, nonslip grips provide comfort and control without adding bulk

These everyday pliers with fine-tipped jaws and 5/8 inch side cutters are essential for applications like wiring electrical circuits, installing drop ceilings, and maintaining and repairing vehicles and equipment.

These everyday pliers with fine-tipped jaws and 5/8 inch side cutters are essential for applications like wiring electrical circuits, installing drop ceilings, and maintaining and repairing vehicles and equipment.

Stout, Strong Build

Much thicker than our 7 in. Long Nose Pliers, these stout, strong pliers resist bending and flexing along their entire length to handle the toughest jobs.

Fine Tipped Jaws

Tapering to a fine tip just at the nose, the jaws are thick and wide at the base so they won't roll over each other or separate when you are aggressively pulling or twisting.

Stout, Strong Build

Much thicker than our 7 in. Long Nose Pliers, these stout, strong pliers resist bending and flexing along their entire length to handle the toughest jobs.

 

Fine Tipped Jaws

Tapering to a fine tip just at the nose, the jaws are thick and wide at the base so they won't roll over each other or separate when you are aggressively pulling or twisting.

 

Crosscut Teeth

Oriented at 120 degrees to each other, the serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.

 

Grip in All Directions

Unlike straight serrations where the grip strength varies relative to tooth direction, a crosscut pattern grips evenly in any direction.

 

Finer Teeth

Crosscut teeth are smaller and finer than straight serrations, creating a more uniform surface and more contact area for a sure, nonslip bite with less damage to work piece.

 

Clean Cut with Minimal Effort

Machining the blades to an optimized 65-degree angle allows them to be strong yet sharp, producing a satisfyingly smooth, clean cut that requires minimal effort.

INDUCTION HARDENED

After the full pliers have been heat treated, a secondary induction-heating process hardens just the blades to 58-64 HRC, making them extremely durable and able to cut tougher materials.

KNIFE-TO-KNIFE

Comprised of two opposing blades that meet in the center, it is an extremely reliable cutting method, especially for harder wires. For a clean, low-effort cut, it requires a high level of manufacturing expertise to produce the near perfect alignment of the blades. When this cannot be consistently achieved, some manufacturers may turn to a less effective knife-and-anvil design (one knife blade, one blunted blade) that doesn't require such precise alignment.

Cutting Capacities

 

Lean and Practical Grips

Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They're slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.

Lean and Practical Grips

Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They're slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.

Non-absorbing and resistant to most common fuels, lubricants, and cleaners. Won't get soft or sticky over time. Easy to wipe clean.

8 Inch Long Nose Pliers

A. Length 8.5 in.
B. Width 2.1 in.
C. Height 0.6 in.
D. Head Length 2.8 in.
E. Head Width 1 in.
F. Head Thickness 0.5 in.
G. Handle Length 5.7 in.
H. Grip Length 4.2 in.
I. Teeth 0.9 in.
J. Blade Length 0.6 in.
Weight 0.58 lb
Country of Origin Taiwan