New
TEKTON 32 Inch Wrecking Pry Bar
Back angle view of Tekton 32 inch full-size pry bar. Item #LFV37132
Side view of Tekton 32 inch full-size pry bar. Item #LFV37132
TEKTON 32 Inch Wrecking Pry Bar
Person holding Tekton 32 inch full-size pry bar. Item #LFV37132
Tap image to zoom in
Item #LFV37132

32 Inch Wrecking Pry Bar

•

Length

24 in.
$40
32 in.
$48
40 in.
$60
$48.00
Add to Cart
DetailsSpecifications

Details

Video Overview

Our wrecking bars are made of 1045 steel and have two flat ends for prying and nail pulling. Both ends are hardened to 38 - 48 HRC and have beveled tips. The flat-oval shaft reinforces the bar's strength in the direction of prying, and the rounded edges won't dig into your hand like the corners of a hex bar can. A red powder-coat finish makes the bar easy to spot on a job site.

Two Prying Ends

The chisel end of the bar prying between two pieces of wood, with an inset image showing a close-up of the end.

Chisel End


The chisel end is solid and flat for heavy prying and lifting. A gradual, rolling bend lets the bar rock smoothly across the work surface instead of pivoting on a single point, reducing gouging.

The pry bar removing a nail, with an inset image showing a straight-on close up view of the end.

Nail Puller End


A tapered V-notch slides under nail heads for quick, secure pulling. The head is bent to a right angle, rather than into a tight hook, keeping the handle clear of nearby obstructions.

Flat-Oval Bar Shape


Unlike hex or round bars, the flat-oval shape concentrates material in the direction you push or pull, where strength matters most. Its rounded edges won't dig into your palm the way hex corners can, and its flat sides won't twist in your hand the way a round bar can.


Graphic showing hex, round, and Tekton's flat-oval shape.

A hand pulling on a wrecking pry bar.
Graphic showing how the offset shaft provides more hand clearance.

Offset Shaft


The handle shaft is offset to allow more hand clearance during use.

Graphic comparing straight handles with Tekton's offset handle.

Beveled Tips


Both prying tips have a beveled edge, so either end can be driven into tight seams.

Close-up of the beveled edge
Close-up image of the ends of the pry bar, showing the finish.

Material and Construction


The forged bar is made of 1045 steel, and the prying ends are hardened to 38 - 48 HRC. A red powder-coat finish makes the bar easy to spot on a job site.

Specifications

32 Inch Wrecking Pry Bar

Specs for 32 Inch Wrecking Pry Bar
Country of Origin
Germany
Item Weight
5.54 lb.