Your web browser is not supported. For the best experience on Tekton.com, please upgrade to a modern browser such as Edge, Chrome, or Firefox
Click image to zoom in

1/2 Inch Drive Deep 6-Point Axle Nut Impact Socket Set, 7-Piece (29-38 mm) with Rail

Item #SID92101
 • Available in 6+ weeks

Storage Option

$78.00

This set contains impact sockets from our current lineup that fit axle nut sizes commonly found on passenger vehicles.


Set Includes:

Details

Quickly Remove Axle Nuts

Tekton Axle Nut Socket on an impact wrench next to the axle nut on a wheel

Quickly Remove Axle Nuts

Impact sockets are ideal for quickly and safely removing and replacing axle nuts. This set contains sockets for servicing 6-point axle nuts.

A 6-point axle nut laying flat

Two Size Markings

Two Size Markings

The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.

Socket size markings shown on front (laser) and back (stamped)

Deep Length for Greater Reach

Tekton Axle Nut cutaway photo showing the reach and the internal depth

Deep Length for Greater Reach

  • The deep length socket can reach into wells to access axle nuts without the use of an impact extension, which could reduce torque.
  • The interior well extends far into the socket, providing ample room for the axle nut and spindle.

Drive Tool Retention

Drive Tool Retention

Sockets work for both types of anvils found on 1/2 inch drive impact wrenches:

Illusration of a torque wrench anvil with a friction ring

Friction Ring Anvil

Illusration of a torque wrench anvil with a detent pin

Detent Pin Anvil

6-Point Socket Opening

Tekton 6-point Socket opening

6-Point Socket Opening

Provides an exact fit for hex fasteners. Learn more.

Illustration showing how the 6-point socket opening applies force to the flat sides of an axle nut

Radiused corners prevent fastener round-off by applying force to the axle nut’s flat sides rather than its corners.

Sockets Exceed ANSI Torque Standards

Sockets Exceed ANSI Torque Standards

Each socket size meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.

(A single-cycle test applies torque until a specified value is reached without failure or permanent deformation.)
Proof torque chart for Tekton 6-Point Axle Nut Sockets

6-Point Sockets

ANSITEKTON
Source: ASME B107.33M - 2002

Note: There are no published ASME standards for 38 mm 6-point impact sockets in 1/2 inch drive.

High-Performing Steel Alloys

High-Performing Steel Alloys

We choose the best combination of steel alloys, heat treating specifications, and forming processes for each socket to meet the highest performance requirements. Learn more.

Materials chart for Tekton 6-Point Axle Nut Sockets

50BV30 Chromium-Vanadium (Cr-V)

Show Elements

Carbon: 0.27 - 0.33%
Chromium: 0.30 - 0.50%
Manganese: 0.70 - 1.00%
Phosphorous: ≤0.030%
Silicon: ≤0.10%
Sulfur: ≤0.030%
Vanadium: 0.10 - 0.15%
Boron: ≥0.0005%
Iron: 97.86 - 98.47%

4140 Chromium-Molybdenum (Cr-Mo)

Show Elements

Carbon: 0.38 - 0.43%
Chromium: 0.80 - 1.10%
Manganese: 0.75 - 1.00%
Molybdenum: 0.15 - 0.30%
Nickel: ≤0.025%
Phosphorous: ≤0.025%
Silicon: 0.15 - 0.35%
Sulfur: ≤0.025%
Iron: 96.74 - 97.69%

All sockets have a corrosion-resistant manganese phosphate coating.

Portable Storage Rail

Portable Storage Rail

Keep your sockets organized and ready to go using the included storage rail. The twist-to-lock clips hold sockets securely and can be repositioned anywhere along the rail.

Red socket rail for 6-point Axle Nut Sockets

Specs

1/2 Inch Drive Deep 6-Point Axle Nut Impact Socket Set, 7-Piece (29-38 mm) with Rail

Specs for 1/2 Inch Drive Deep 6-Point Axle Nut Impact Socket Set, 7-Piece (29-38 mm) with Rail
Country of Origin
Sockets made in Taiwan. Rail made in USA.
Item Weight
8.82 lb.