8 Inch End Cutting Pliers

Item #PCT10008
Ships December 9
$16.00
  • Cuts off nails and screws, trims wires, and pulls out staples
  • Blades are induction hardened to HRC 58-64 for superior cutting performance and durability
  • Overhanging jaws and flush rivet create clearance to cut off long nails or wires
  • Round nose profile provides a high-leverage rocking prying action to pull out stubborn nails and staples
  • Wide, gently rounded handle profile with slim, nonslip grips lets you comfortably squeeze as hard as needed

With broad, round profile jaws and relatively long handles, these end cutting pliers snip off old nails and screws, trim wires, and pull out staples.

Generously sized with a strong, heavy build, these pliers have flat, squared off jaws and large side cutters for wiring electrical circuits, installing distribution panels, and maintenance and repair of utilities and appliances.

Clean Cut with Minimal Effort

Machining the blades to an optimized 90-degree angle allows them to be strong yet sharp, producing a satisfyingly smooth, clean cut that requires minimal effort.

INDUCTION HARDENED

After the full pliers have been heat treated, a secondary induction-heating process hardens just the blades to 58-64 HRC, making them extremely durable and able to cut tougher materials.

KNIFE-TO-KNIFE

Comprised of two opposing blades that meet in the center, it is an extremely reliable cutting method, especially for harder wires. For a clean, low-effort cut, it requires a high level of manufacturing expertise to produce the near perfect alignment of the blades. When this cannot be consistently achieved, some manufacturers may turn to a less effective knife-and-anvil design (one knife blade, one blunted blade) that doesn't require such precise alignment.

Cutting Capacities

 

Unlimited Cutting Depth

The jaws overhang each side of the body creating the bypass clearance to cut off long nails or wires. The rivet is polished flush on both sides of the pliers, ensuring it won't be an obstacle.

High-Leverage Prying Action

The round nose profile provides a rocking prying action that creates easy, controlled leverage for pulling out staples or nails.

Unlimited Cutting Depth

The jaws overhang each side of the body creating the bypass clearance to cut off long nails or wires. The rivet is polished flush on both sides of the pliers, ensuring it won't be an obstacle.

 

High-Leverage Prying Action

The round nose profile provides a rocking prying action that creates easy, controlled leverage for pulling out staples or nails.

 

Wide Profile Handles

Generous in overall size, the handles have an extra wide, gently rounded profile that creates a large, smooth contact surface. This spreads out the pressure against your hand so you can comfortably squeeze as hard as needed.

 

Lean and Practical Grips

Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They're slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.

Non-absorbing and resistant to most common fuels, lubricants, and cleaners. Won't get soft or sticky over time. Easy to wipe clean.

8 Inch End Cutting Pliers

A. Length 8.4 in.
B. Width 2.1 in.
C. Height 1.2 in.
D. Head Length 0.7 in.
E. Head Width 1.7 in.
F. Handle Length 7.6 in.
G. Grip Length 5.1 in.
H. Grip Width 0.6 in.
Weight 0.79 lb
Country of Origin Taiwan