6 Inch 70-Degree Bent Long Nose Pliers

Item #PGF10406
Ships December 9
$16.00
  • Slender nose is bent to 70 degrees to work around obstructions
  • Extra long bent section reaches deep into tight, narrow spaces
  • Thin, sleek build makes these pliers light and exceptionally maneuverable
  • Crosscut teeth distribute force evenly for sure grip in any direction
  • Slim, nonslip grips provide comfort and control without adding bulk

Identical in its slim, lightweight build to our 7 in. Long Nose Pliers, these pliers have a finely tipped, bent nose for reaching around obstructions, grasping small wires and parts, and even prying loose small staples.

Identical in its slim, lightweight build to our 7 in. Long Nose Pliers, these pliers have a finely tipped, bent nose for reaching around obstructions, grasping small wires and parts, and even prying loose small staples.

Generous Reach

A smooth 70-degree bend works around obstructions. Originating from a point more than halfway down the jaw, the bent section is exceptionally long, offering a generous reach into tight, narrow spaces.

 

Crosscut Teeth

Oriented at 120 degrees to each other, the serrations are cut in two passes to form regularly-spaced, diamond-shaped teeth.

 

Grip in All Directions

Unlike straight serrations where the grip strength varies relative to tooth direction, a crosscut pattern grips evenly in any direction.

 

Finer Teeth

Crosscut teeth are smaller and finer than straight serrations, creating a more uniform surface and more contact area for a sure, nonslip bite with less damage to work piece.

 

Lean and Practical Grips

Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They're slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.

Lean and Practical Grips

Single-layer vinyl grips offer a bit of comfortable cushion and provide a smooth, yet nonslip surface. They're slim, not thick and bulky, so they stay out of the way when space is tight and are always easy to handle, even with gloves on.

Non-absorbing and resistant to most common fuels, lubricants, and cleaners. Won't get soft or sticky over time. Easy to wipe clean.

6 Inch 70-Degree Bent Long Nose Pliers

A. Length 6.5 in.
B. Width 2 in.
C. Height 1.9 in.
D. Head Length 2 in.
E. Head Width 0.8 in.
F. Head Thickness 0.4 in.
G. Handle Length 4.5 in.
H. Grip Length 3.4 in.
I. Grip Width 0.5 in.
J. Teeth 1 in.
Weight 0.37 lb
Country of Origin Taiwan