Item #DVS01313
6.5 mm Slotted Insulated Screwdriver (6 in. Shank)
6.5 mm Slotted Insulated Screwdriver (6 in. Shank)
•
$13.00
Details
Insulated Drivers Rated for Electrical Work
Each driver handle and shank is insulated to protect against electrical shock for voltages up to 1000 V AC and 1500 V DC. They are tested to ensure they meet IEC 60900:2018 and ASTM F1505-16 standards.
Slim Shank for Recessed Screws
The shank diameter is reduced so the insulation can be molded flush with the tip, giving you access to screws in narrow, recessed holes.
A Handle Designed for Speed and Torque
The front of the handle is round for quick turning and the middle transitions to a tri-lobe shape that provides a secure grip for high-torque driving.
Soft Overmold Grip for Controlled Turning
The handle's red exterior is made of a lightly textured TPE material that is slightly soft and grippy for controlled spinning, fine adjustments, and reduced slipping under torque.
Handle materials resist most common shop chemicals.
Two Handle Sizes that Scale with the Tips
Drivers with small tip sizes have smaller, more rounded handles for control with precision screws. Drivers with larger tip sizes have bigger, more triangular handles to turn large screws with more torque.
Size Markings in Three Locations
Each driver has the tip size engraved in three locations with high-contrast laser markings.
Flared End Prevents Slipping
The front end of the handle has a tri-lobe shape that flares out to prevent your hand from slipping while you're pushing it forward and turning.
Through-Hole in Handle
Each screwdriver handle has the same size through-hole so you can hang it on a hook. You can also attach a safety lanyard when working at heights to prevent drops.
Steel Shank Won't Twist Out
The end of the shank is flattened to form a broad surface that resists twisting inside the handle. The handle is molded around the shank, creating a solid connection that is stronger and straighter than simply pressing the shank into a premade handle.
Tip Geometry and Coating
Our metric slotted tips are made to the ISO 2380-1:2004(E) standard for a precise fit in slotted screws. They have a slight wedge shape that grips both sides of the slot.
Each tip is coated with black manganese phosphate, creating a slightly rough surface that enhances screw engagement. The conversion coating produces a uniform, corrosion-resistant layer that preserves tip geometry and resists flaking.
Materials and Construction
Red Handle Overmold
Soft, grippy thermoplastic elastomer (TPE).
Yellow Handle Core
Hard polypropylene, injection molded around the shank.
Insulated Shank
Alloy steel, through-hardened and tempered (including the tip), with a polypropylene sleeve.
Tip
Coated with black manganese phosphate.
Specs
6.5 mm Slotted Insulated Screwdriver (6 in. Shank)
| Country of Origin | Germany |
| Item Weight | 0.27 lb. |