Long #3 Phillips High-Torque Screwdriver
Details
Apply High Torque
The handle's three-sided geometry directly engages the structure of your hand, instead of relying on friction with your skin, so you can apply high force with less fatigue.
![One hand holding a High-Torque Screwdriver](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-higher-torque-ht-cr-1x.jpg)
![Two hands spinning a High-Torque Screwdriver](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-spin-quickly-ht-cr-1x.jpg)
Spin Fasteners Quickly
Round sections at the front and back ends of the handle allow you to spin long, finely threaded fasteners quickly and continuously.
![High-Torque screwdriver gripping surface](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-nonslip-handle-phillips-ht-cr-1x.jpg)
Durable, Nonslip Handle
The overmolded grip provides a nonslip surface that is permanently bonded to the handle and won't degrade or become sticky over time.
RESISTANT TO:
- Extreme Temps
- Gas &
Fuels - Oils &
Grease - Cleaners & Solvents
![High-Torque Markings - Phillips](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-markings-phillips-ht-cr-1x.jpg)
Easy-to-Read Markings
Tip type and size are printed on the end of the driver for easy identification.
Phillips Tip
![](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-tip-info-phillips-drawing-1x.png)
Truncated at the tip to fully engage fasteners without bottoming out
![](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-tip-info-phillips-cr-1x.jpg)
Materials and Construction
![High-Torque Phillips Screwdriver](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-cutaway-phillips-ht-cr-2x.jpg)
AISI 8650 Steel Blade
- Strong Ni-Cr-Mo alloy hardened to HRC 52–56
- Chrome-plated shaft finish for increased corrosion resistance
Polypropylene Handle
- Reinforced with calcium carbonate for dimensional stability
- Shore D 68 durometer
Overmolded Grip
- Soft thermoplastic elastomer (TPE)
- Shore A 80 durometer
![Driver Blades are Insert Molded](https://media.tekton.com/images/details/drivers/screwdrivers/tekton-insert-molded-ht-cr-1x.jpg)
Insert Molded for Exceptional Strength
We use a molding process that forms the handle around the blade, rather than forcing the blade into a premade handle. The result is a straighter blade that can’t twist out.
Specs
Long #3 Phillips High-Torque Screwdriver
![Specs for Long #3 Phillips High-Torque Screwdriver](https://media.tekton.com/images/spec/DHP34003_spec.jpg)
Country of Origin | United States |
Item Weight | 0.37 lb. |
Patents |