Your web browser is not supported. For the best experience on Tekton.com, please upgrade to a modern browser such as Edge, Chrome, or Firefox
Earn $8.90 $17.80 in Rewards.
Offer ends Monday, 11/28 at 11:59 p.m. ET.
Click image to zoom in

3/8 Inch Drive 12-Point Socket and Ratchet Set, 47-Piece (5/16-3/4 in., 8-19 mm)

Item #SKT15302
 • Ships tomorrow
$89.00

Also available in 6-point

#SKT15301

Set Includes:

Details

Socket Markings

Large, Stamped Markings

  • Permanently impressed into the material by a roll-stamp die
  • As large as possible while still being readable along the socket's curved surface
  • Clearly visible size numbers with extra-deep outline
Socket Markings
Deep-length socket in tight, recessed area

Fully Stepped Shoulders

Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.


Tekton deep-length socket with fully stepped shoulers
Socket cut in half

Exterior + Interior Finishes

  • Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
  • Interior is protected against rust with clear coat, rather than commonly-used metallic paint
Socket cut in half
12-Point Socket Opening

12-Point Socket Opening

Get more access positions for multiple types of fasteners


12-Point Socket Fastener Types

Prevents Fastener Round-Off

12-Point Socket Grips Sides

Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.

Drive tool engaging socket

Secure Drive Tool Engagement

  • Four detent grooves provide a secure connection with the retaining ball of a drive tool
  • Beveled inner rims help guide the socket onto other tools

High Torque Strength

Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation.

METRIC SERIES

3/8 inch drive deep-length sockets torque specs chart (metric series)
ANSITEKTON
Source: ASME B107.5M - 2002

INCH SERIES

3/8 inch drive deep-length sockets torque specs chart (inch series)
ANSITEKTON
Source: ASME B107.1 - 2002
90-Tooth Quick Release Ratchet

90-Tooth Ratchet

  • 4-degree swing arc
  • Ultra-compact head is reduced in all dimensions
  • Quick-release drive locks sockets onto tang and releases with the press of a button

View Ratchet

90-Tooth Quick Release Ratchet

Included Accessories

3 and 6 Inch Extensions

3 and 6 Inch Extensions

Reach past obstructions and into tight spaces. Knurled band provides grip for starting or turning loosened fasteners.

Universal Joint

Universal Joint

Pin-style joints rotate smoothly and continuously to access fasteners at up to 55-degree angles.

Storage Case

Storage Case

  • Resilient high-density polyethylene material withstands exposure to common lubricants, fuels, and solvents
  • Strong latches, and hinges with metal pins
  • Molded size markings for each tool inside the case
Storage Case

Specs

3/8 Inch Drive 12-Point Socket and Ratchet Set, 47-Piece (5/16-3/4 in., 8-19 mm)

Specs for 3/8 Inch Drive 12-Point Socket and Ratchet Set, 47-Piece (5/16-3/4 in., 8-19 mm)
Country of Origin
Taiwan
Item Weight
7.79 lb.

Make it a System

3/8 Inch Drive 12-Point Socket and Ratchet Set, 47-Piece (5/16-3/4 in., 8-19 mm)
This Item

+

3/8 Inch Drive Hex, Torx, TR Torx, Phillips, Slotted, Square Bit Socket Set (91-Piece)
Combination Wrench Set, 30-Piece (1/4-1 in., 8-22 mm) with Pouch
Multi-Bit Driver Set, 2-Piece (#1 - #2, 3/16 - 1/4 in. )
Ball End Hex Key Set, 28-Piece (0.050-3/8 in., 1.3-10 mm) with Holder
#SKT15302
 • 
$89
 • 
View Details
#SHB91312
 • 
$226
 • 
View Details
#90192
 • 
$168
 • 
View Details
#DRV82001
 • 
$15
 • 
View Details
#KLX91301
 • 
$45
 • 
View Details
#PLR99022
 • 
$58
 • 
View Details
Total: $543