1/2 Inch Drive Torx Impact Bit Sockets
Strong 2-Piece Design
Our two-piece bit socket design allows us to optimize the steel alloys, heat treatments, and forming processes for the bit and socket separately. This results in a tool that's higher performing and more durable than traditional 1-piece impact bit sockets.
AS2 Steel Bit
The bit is made from hardened S2 steel for a tip that maintains its geometry even under stress.
BPermanent Connection
The bit is pressed directly into the socket for a permanent connection that won't loosen over time or with the forces of impact driving.
C4140 Cr-Mo Socket
The socket is made from 4140 chromium-molybdenum (Cr-Mo) steel and properly heat-treated for use on impact wrenches.
Two Size Markings
The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.
The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.
The straight, extended length bit allows you to reach deeper into recesses than other shorter and tapered-style bits.
Extended Reach
The straight, extended length bit allows you to reach deeper into recesses than other shorter and tapered-style bits.
Precise Tips
The star-shaped bit has 6-lobes machined to precise tolerances for an exact, high-torque fit on Torx® fasteners that resists camming out.
The star-shaped bit has 6-lobes machined to precise tolerances for an exact, high-torque fit on Torx® fasteners that resists camming out.
Drive Tool Retention
Sockets work with both types of anvils found on 1/2 inch drive impact wrenches:
Friction Ring Anvil | Detent Pin Anvil |
1/2 Inch Drive x T45 Torx Impact Bit Socket
A. Length | 2.95 in. |
B. Tip Size | T45 |
C. Drive End Diameter | 0.94 in. |
D. Drive Size | 1/2 in. |
E. Exposed Bit Length | 1.5 in. |
F. Hex Shank Across Points | 0.35 in. |
G. Pin Hole Diameter | 5.3 mm |
Weight | 0.21 lb. |
Country of Origin | Taiwan |