3/8 Inch Drive 12-Point Impact Socket Set with Rails, 38-Piece (6-24 mm)
Details
Two Size Markings
The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.
The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.
Access + Versatility
Fully Stepped Shoulders
The narrowed socket diameter goes all the way down to the base of the socket on small deep-length sizes. This allows for better reach into tight recessed areas.
Full-Length Socket Well
Not only is the socket a deep length, but the interior well also extends far into the socket, which allows for better fastener engagement in more situations.
Drive Tool Retention
Sockets work for both types of anvils found on 3/8 inch drive impact wrenches:
Friction Ring Anvil |
Detent Pin Anvil |
12-Point Socket Opening
Provides an exact fit for 12-point fasteners
Learn more
12-Point Socket Opening
Provides an exact fit for 12-point fasteners
Learn more
Prevents Fastener Round-Off
Prevents Fastener Round-Off
Radiused corners prevent fastener round-off by applying force to a fastener's flat sides rather than its corners.
Sockets Exceed ANSI Torque Standards
Each socket size meets a minimum of 1.2 times the ANSI/ASME standard for proof torque.
(A single-cycle test applies torque until a specified value is reached without failure or permanent deformation.)
INCH SERIES
ANSI | TEKTON | ||
Source: ASME B107.110 - 2012 |
METRIC SERIES
ANSI | TEKTON | ||
Source: ASME B107.110 - 2012 |
Note: There are no published ASME standards for 1/4 in., 9/32 in., 13/16 in., 7/8 in., 15/16 in., 1 in., 6 mm and 7 mm impact sockets in 3/8 inch drive.
High-Performing Steel Alloys
Part by part, we choose the best combination of steel alloys, heat treating specifications, and forming processes to meet the highest performance requirements. Learn more
50BV30 Chromium-Vanadium (Cr-V) Show Elements Carbon: 0.27 - 0.33%
|
4140 Chromium-Molybdenum (Cr-Mo) Show Elements Carbon: 0.38 - 0.43%
|
6140 Chromium-Vanadium (Cr-V) Show Elements Carbon: 0.38 - 0.43%
|
8660 Nickel-Chromium-Molybdenum (Ni-Cr-Mo) Show Elements Carbon: 0.56 - 0.64%
|
All pieces have a corrosion-resistant manganese phosphate coating.
Sockets (Standard and Deep Lengths)
INCH
- Standard-length sockets are 6140 Cr-V
- Deep-length sockets are 50BV30 Cr-V
METRIC
- Standard-length sockets are 6140 Cr-V
- Deep-length sockets are 50BV30 Cr-V
Accessories
3 in., 6 in., and 10 in. Extensions
(6140 Cr-V)
Adapter and Reducer
(8660 Ni-Cr-Mo)
Universal Joint
(Ball: 8660 Ni-Cr-Mo)
(Socket: 4140 Cr-Mo)
Storage Rails + Tray
- Twist-to-lock design securely holds sockets on the rail
- Rails latch securely into the included storage tray
- Twist-to-lock design securely holds sockets on the rail
- Rails latch securely into the included storage tray
Specs
3/8 Inch Drive 12-Point Impact Socket Set with Rails, 38-Piece (6-24 mm)
Country of Origin | Sockets made in Taiwan. Rails and tray made in USA. |
Item Weight | 6.93 lb. |