Click image to zoom in

39-Piece High-Torque Screwdriver & Nut Driver Sets (Phillips, Slotted, Torx, Square, Nut)

Item #DRV49002
•
Ships tomorrow
$125.00-150.00
•
Phillips Sizes
Slotted Sizes
Torx Sizes
Square Sizes
Nut Driver Sizes

The exact color of the black oxide blade finish may vary.

Description

Included In This Set

Phillips
#0 - #3

Slotted
1/8 - 5/16 in.

Torx®
T10 - T30

Square
S1 - S3

Nut
IN3/16 - 1/2
MM5 - 10 mm

Versatile Handle Design

Generate Higher Torque

The three-sided middle section of the handle leverages the structure of your hand to generate higher turning power longer.

Spin Fasteners Quickly

The round shape at the front and back ends of the handle allow you to spin fasteners quickly and continuously.

Durable, Nonslip Handle

The overmolded grip provides a soft, nonslip surface that is permanently bonded to the handle and won't degrade or become sticky over time.

RESISTANT TO:
  • Extreme Temps
  • Gas &
    Fuels
  • Oils &
    Grease
  • Cleaners & Solvents

Easy-to-Read Markings

Tip type and size are printed on the end of the driver for easy identification.

Precisely Formed Tips

  • The tip geometry is milled to precise tolerances for an exact fit with fasteners.
  • Made from strong, heat-treated steel so that the tips hold their shape over time.

Phillips and Slotted in Three Lengths

Phillips and slotted screwdrivers include stubby (1-1/2 inch), regular (4 inch), and long (8 inch) blades.

6-Point Nut Driver Socket

  • The 6-point socket snugly fits hex-shaped fasteners so it won't slip off while you work or round off corners under stress.
  • A recess inside the shaft accommodates the excess threaded tail of longer bolts or studs.

Materials + Construction

AISI 8650 Steel Blade

  • Strong nickel, chromium, molybdenum alloy hardened to HRC 52-56
  • Chrome-plated shaft finish for increased corrosion resistance

Polypropylene Handle

  • Reinforced with calcium carbonate for dimensional stability
  • Shore D 68 durometer

Overmolded Grip

  • Soft thermoplastic elastomer (TPE)
  • Shore A 80 durometer

AISI 4037 Steel Shaft

  • Strong alloy steel hardened to HRC 41-46
  • Black oxide finish - keep lightly oiled for best corrosion protection

Polypropylene Handle

  • Reinforced with calcium carbonate for dimensional stability
  • Shore D 68 durometer

Overmolded Grip

  • Soft thermoplastic elastomer (TPE)
  • Shore A 80 durometer

Insert Molded for Exceptional Strength

We use a molding process that forms the handle around the blade, rather than forcing the blade into a premade handle. The result is a straighter blade that can’t twist out.

Specs

High-Torque Screwdriver & Nut Driver Set, 39-Piece (Phillips, Slotted, Torx, Square, Nut)

A. Length 8.0 in.
B. Width 1.3 in.
C. Height 1.3 in.
D. Exposed Blade Length 4.0 in.
E. Handle Length 4.0 in.
F. Shaft Diameter 0.125 in.
Weight 0.13 lb.
Country of Origin United States