1/4 Inch Drive 12-Point Socket and Ratchet Set, 55-Piece (5/32-9/16 in., 4-14 mm)
Set Includes:
- IN Standard length
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in. (11 sizes) - IN Deep length
5/32, 3/16, 7/32, 1/4, 9/32, 5/16, 11/32, 3/8, 7/16, 1/2, 9/16 in. (11 sizes) - MM Standard length
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm (13 sizes) - MM Deep length
4, 4.5, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13, 14 mm (13 sizes) - Universal joint
- 3 inch extension
- 6 inch extension
- Hex bit holder
- Spinner handle
- 90-tooth ratchet
- Storage case
Add socket rails and tray storage:
Details

Large, Stamped Markings
- Permanently impressed into the material by a roll-stamp die
- As large as possible while still being readable along the socket's curved surface
- Clearly visible size numbers with extra-deep outline


Fully Stepped Shoulders
Narrowed diameter stretches to the base of the socket on small, deep-length sizes. This provides greater reach into tight, recessed areas.


Exterior + Interior Finishes
- Chrome-plated exterior is highly corrosion resistant and wipes clean to a mirror finish
- Interior is protected against rust with clear coat, rather than commonly-used metallic paint


12-Point Socket Opening
Get more access positions for multiple types of fasteners

Prevents Fastener Round-Off

Radiused corners prevent fastener round-off by applying force to a fastener's flat sides, rather than its corners.

Secure Drive Tool Engagement
- Four detent grooves provide a secure connection with the retaining ball of a drive tool
- Beveled inner rims help guide the socket onto other tools
High Torque Strength
Meets minimum value of 1.2 times the ANSI standard for Proof Torque. Verified by a single-cycle test that applies torque until specified value is reached without failure or permanent deformation.
METRIC SERIES

ANSI | TEKTON | ||
Source: ASME B107.5M - 2002 |
INCH SERIES

ANSI | TEKTON | ||
Source: ASME B107.1 - 2002 |

90-Tooth Ratchet
- 4-degree swing arc
- Ultra-compact head is reduced in all dimensions
- Quick-release drive locks sockets onto tang and releases with the press of a button

Included Accessories

3 and 6 Inch Extensions
Reach past obstructions and into tight spaces. Knurled band provides grip for starting or turning loosened fasteners.

Universal Joint
Pin-style joints rotate smoothly and continuously to access fasteners at up to 55-degree angles.

Spinner Handle
Use the sockets like a nut driver with the spinner handle, adding a ratchet to the end for extra leverage.

Hex Bit Holder
Quickly change out and adapt any 1/4 inch hex shank bit to 1/4 inch drive tools.

Storage Case
- Resilient high-density polyethylene material withstands exposure to common lubricants, fuels, and solvents
- Strong latches, and hinges with metal pins
- Molded size markings for each tool inside the case

Specs
1/4 Inch Drive 12-Point Socket and Ratchet Set, 55-Piece (5/32-9/16 in., 4-14 mm)
Country of Origin | Taiwan |
Item Weight | 4.42 lb. |