Your web browser is not supported. For the best experience on Tekton.com, please upgrade to a modern browser such as Edge, Chrome, or Firefox
TEKTON SIF20708-D 1/2 Inch Drive 3/4 x 13/16 Inch Thin Wall Impact Flip Socket
TEKTON SIF20708-D 1/2 Inch Drive 3/4 x 13/16 Inch Thin Wall Impact Flip Socket
TEKTON SIF20708-D 1/2 Inch Drive 3/4 x 13/16 Inch Thin Wall Impact Flip Socket
Click image to zoom in

1/2 Inch Drive 3/4 x 13/16 Inch Thin Wall Impact Flip Socket

#SIF20708
 • 
$10.00

Details

Ideal for Wheel Service

TEKTON Impact Flip Sockets Wheel Service
For use with 1/2 inch drive impact tools
Requires 3-inch extension
Flip to change sizes

Maximum Reach

TEKTON Impact Flip Sockets Max Reach

Maximum Reach

The Tekton flip socket is both longer and has lower stepped shoulders than competitors to give you maximum reach into lug nut wells.

Thin Walls

TEKTON Impact Flip Sockets Thin Walls

The outer diameter is 1 to 2 mm smaller than other Tekton impact sockets, allowing for better access in tight lug nut wells.

Radiused Corners

TEKTON Impact Flip Sockets Radiused Corners

The radiused corners prevent fastener round-off by applying force to the flat sides of a lug nut, rather than its corners.

60° Chamfer

The steep 60° chamfered opening makes it easy for the flip socket to slide over lug nuts.

TEKTON Impact Flip Sockets Chamfer
TEKTON Impact Flip Sockets Extra Deep Wells

Extra Deep Wells

Each socket well is extra deep to provide increased engagement with lug nuts and clearance for decorative caps.

  • The extra long socket allows each well to be deeper for greater engagement
  • The extension is recessed to avoid contact with decorative caps

Laser & Stamped Markings

The size is marked in two ways on every socket—both as a high-visibility laser marking and a permanent stamped marking.

TEKTON Impact Flip Sockets Markings

Sockets Exceed ANSI Torque Standards

Each flip socket size meets a minimum of 1.3 times the ANSI/ASME standard for proof torque.

(A single-cycle test applies torque until a specified value is reached without failure or permanent deformation.)

INCH SERIES

TEKTON 1/2 Inch Drive Flip Impact Sockets - Proof Torque Chart (Inch Series)
ANSITEKTON
Source: ASME B107.110-2012

METRIC SERIES

TEKTON 1/2 Inch Drive Flip Impact Sockets - Proof Torque Chart (Metric Series)
ANSITEKTON
Source: ASME B107.110-2012

High-Performing Steel Alloys

TEKTON Impact Flip Sockets Steel Alloys

High-Performing Steel Alloys

The flip sockets are made from 4140 Chromium-Molybdenum steel

All pieces have a corrosion-resistant manganese phosphate coating.


Specs

1/2 Inch Drive 3/4 x 13/16 Inch Thin Wall Impact Flip Socket

Specs for 1/2 Inch Drive 3/4 x 13/16 Inch Thin Wall Impact Flip Socket
Country of Origin
Taiwan
Item Weight
0.36 lb.